FILLING MACHINE, TYPE KOF-104 AND KOF-106

Filling Machines

• Simple operation
• Short setting time for different lengths
• Suitable for small series production
• Three tube filling system

KOF-104 and KOF-106 are basically the same machine. This machine is designed mainly for
short to medium filling runs, e g for industrial heaters and trial runs before mass production,
and incorporate adjustment for different tube lengths and diameters.

KOF-106 is the normal version, but for thicker elements, where there is not enough space for
6 tubes, KOF-104 is supplied.

The machine consist of three parts. All parts should be mounted to a wall or a pillar. Vibration dampers are required when more than one machine is mounted on the same wall. The vibration from one machine can cause too loose MgO in another.

– Bottom stand for the element tube
– Top stand with motor and clutch
– Control box with frequence converter
– Eable connection between control box and machine
– Equipment for filling cartridge heaters (option)
– Equipment for filling elements with 2, 3 or 4 coils (option)
– Simple assembly

Features/benefits

GRANLUND KOF-104/106 is simple to operate and requires little training. The element tubes and coils are inserted manually. Filling tubes are lowered manually.

The actual filling of MgO is done while a motor is lifting the element tubes. The MgO is fed into the element tube between an inner and an outer filling tube. An electric vibrator hammers on the element tube, compacting the MgO.

In order to achieve the best results, every combination of element tube diameter and coil, or terminal pin diameter, requires a separate set of filling tubes. We work with as small tolerances as possible on the filling tubes, in order to get the best filling results and the best
centralization of the coil.

Technical information

Total height:(2 x max element tube length) + 775 mm

Height of bottom stand:Element tube length + 150 mm

Width:890 mm (excl control box)

Depth:320 mm

Weight:appr. 160 kg (1,5 m max element tube length) to 235 kg (6,0 m max element tube length)

Filling speed:100-500 mm/min

Element tube length:150-6000mm

Outer tube Ø:7-20mm

Coil Ø:Min 1,5 mm

Vibrator frequency:Variable 25-35 Hz

Electrical connection:Single-phase 230 V, 50/60 Hz, 350 W